Table of Contents
Advertisement
Charging the built-in battery/Setting the time code (continued)
Setting user information
Setting user information allows you to store -digit
information in the hexadecimal format.
User information is automatically saved in the
memory and retained after you turn off the power.
1
Set the POWER switch to ON.
2
In the setup menus, TC/UB SETUP screen,
select UB PRESET.
•
For menu operation (Page )
•
Operations may also be performed
using buttons on the remote control that
correspond to those on the camera. For
details, see "Description of parts (Remote
control)". (Page 0)
3
Tilt the Operation lever in the
move to YES, and push the Operation lever.
60
4
Set the user information.
Tilt the Operation lever in the
and select user information characters.
•
Tilt in the
and tilt in the
character.
direction to
You can reset the user information to nothing by
pressing RESET/TC SET button.
5
Push the Operation lever when you have
finished setting the user information.
6
Tilt the Operation lever in the
move to YES, and push the Operation lever.
You can use numbers from 0 to 9 and letters
from A to F.
direction to move to the next digit,
directions again to select
BARS
SHUTTER
CH1 SELECT
CH2 SELECT
INPUT 1
INT(L)
INT(R)
ON
INPUT1
INPUT2
OFF
INPUT2
AUDIO
COUNTER
RESET/TC SET
EVF DTL
LCD
Camera
directions
SPEED SELECT
INPUT 2
ON
OFF
MIC POWER +48V
ZEBRA
OIS
WFM
direction to
Advertisement
Table of Contents
