Table of Contents
Advertisement
Setting user information
Setting user information allows you to store 8-digit
information in the hexadecimal format.
User information is automatically saved in the
memory and retained after you turn off the power.
1
Set the POWER switch to ON.
2
In the setup menus, TC/UB SETUP screen,
select UB PRESET.
• For menu operation (Page E-44 of Vol.1)
• Operations may also be performed
using buttons on the remote control that
correspond to those on the camera. For
details, see "Description of parts (Remote
control)". (Page E-23 of Vol.1)
3
Tilt the Operation lever in the
move to YES, and push the Operation lever.
4
Set the user information.
Tilt the Operation lever in the
and select user information characters.
• You can use numbers from 0 to 9 and letters
from A to F.
Tilt in the
direction to move to the next digit,
and tilt in the
directions again to select
character.
You can reset the user information to nothing by
pressing RESET/TC SET button.
5
Push the Operation lever when you have
finished setting the user information.
6
Tilt the Operation lever in the
move to YES, and push the Operation lever.
direction to
directions
BARS
ZEBRA
OIS
EVF DTL
CH1 SEL
CH2 SEL
INT(L)
INPUT1
INPUT1
INPUT2
INPUT2
WFM
AUDIO
INPUT1
INPUT2
ON
ON
OFF
OFF
COUNTER-RESET/TC SET
MIC POWER +48V
POWER
. .
FOCUS
Camera
direction to
27
Advertisement
Table of Contents
