Panasonic AG-HMC80P Operating Instructions Manual page 112

Setup menu list (continued)
OTHER FUNCTIONS screen (continued)
Display
Item
mode
CMPNT OUT CAMERA
SEL PHOTO
(AVCHD mode PB
only)
DOWNCON CAMERA
MODE PB* 1
(AVCHD mode
only)
TV ASPECT
*
PHOTO
DV IN
PB*
3
VIDEO SETUP CAMERA
DV IN
PB *
1
AUDIO OUT CAMERA
DV IN
PB* 1
MENU INIT CAMERA
PHOTO
DV IN
SYSTEM INFO PB* 4
LANGUAGE CAMERA
PHOTO
DV IN
PB
OPERATION CAMERA
TIME PHOTO
DV IN
PB
* Only during clip playback
1
*
2 Only during DV mode
* Enabled during both PHOTO and DV mode
3
* Only during AVCHD mode
4
112
Description of settings
Selects the type of component terminal.
AUTO: Monitor with D4 terminal (720P/1080i output)
1080i: Monitor with D3 terminal (1080i output)
480i: Monitor with D1 terminal (480i output)
•
Cross-conversion is only performed when content recorded at 720P is output at
1080i. Cross-conversion does not take place in other cases.
• DV mode is only output at 480i.
Switches down-conversion output mode.
SIDE CROP: Crops the left and right edges.
• Images may extend beyond the boundaries of the screen and be partially
unable to be seen when outputting from the VIDEO OUT terminal, or when
outputting from the COMPONENT OUT terminal when the COMPNT OUT SEL
item is set to 480i.
LETTER BOX: Adds black bars to the top and bottom edges.
SQUEEZE: Squeezes images horizontally from the left and right.
Sets the aspect ratio of the TV that will be connected.
16:9 4:3
Sets the setup level of video signals.
0%: VIDEO OUT terminal output and recording setup levels will both be set
to 0%.
7.5% A: VIDEO OUT terminal output setup level will be set to 7.5 %, while
recording setup level will be set to 0 %.
Sets the audio signals output from the Pin jack OUT terminal.
CH1/CH2: CH1 terminal = CH1 signals, CH2 terminal = CH2 signals
CH1: CH1 terminal = CH1 signals, CH2 terminal = CH1 signals
CH2: CH1 terminal = CH2 signals, CH2 terminal = CH2 signals
• When an SD Memory Card containing 5.1 channel content, recorded on other
equipment, is played back on the camera, it is down-mixed to 2 channels when
output through the Pin jack OUT or PHONES (headphone) terminal.
Returns menu settings to factory default settings.
YES NO
• Returns all items except User information, CLOCK SET, TIME ZONE, and
OPERATION TIME to factory default settings.
Displays the version of the system in this camera.
YES NO
Selects the language for menu displays.
English
Español
Français
Displays the power-on time (a 5-digit figure).
indicates the factory setting.