Panasonic AG-HMC80P Operating Instructions Manual page 97

CHECK CARD.
Please check the card.
If you use an SD Memory Card that has been
used with other devices or personal computers,
for the first time with this unit, CHECK CARD
may be displayed and the unit cannot operate.
In this case, perform the following:
A Remove the SD Memory Card from the unit
and reinsert it. (Page 30)
The CHECK CARD display may disappear if
the unit detects the card.
B If CHECK CARD remains displayed even if
you remove and insert the card several times,
check the contents of the card and delete all
its data, using a personal computer.
C Format the card with this unit. (Page 28)
If the data in the card is unreadable or cannot be
deleted with a personal computer, the card may
be damaged. Use another SD Memory Card.
CONTROL DATA ERROR
HAS BEEN DETECTED.
An error has been detected in the control
information.
■
D
DISCONNECT USB CABLE.
The camera cannot be operated while connected
via USB cable.
DISCONNECT USB CABLE.
When switching from one mode to another,
disconnect the USB connection cable.
■
I
INCOMPATIBLE CARD.
PLEASE CHECK CARD.
Recording may not be successful with this card.
Please check the card.
■
N
NO CARD
No card is inserted.
NOW ACCESSING.
PLEASE DO NOT REMOVE
CARD.
Card is currently being accessed. Please do not
remove the card.
■
R
REC STOPPED.
NOW WRITING.
Video recording has been stopped. Data is now
being written to the card.
REPAIR CLIP?
Do you wish to repair clips now?
■
S
SET DATE AND TIME
Set the date and time.
■
T
THE CLIP ARE PROTECTED.
PLEASE REMOVE THE PROTECTION.
The clip is protected. Please cancel the
protection.
THE RECORDING IS STOPPED
(OVER THE LIMITATION)
Recording will stop. (Continuous recording for 12
hours)
THIS BATTERY CANNOT
BE USED.
This battery cannot be used.
THIS CARD CANNOT
RECORD IN VIDEO MODE.
The card cannot be used for video recording.
THUMBNAIL DATA ERROR
IS DETECTED.
An error has been detected in the thumbnail
information.
■
U
UNABLE TO FORMAT.
The card cannot be formatted.
97