External Ir Remote Control - AVM OVATION CD 6.2 Operating Instructions Manual

1.7.1 Battery change
Bottom view RC 3 remote control
Unscrew the 6 marked screws (CAUTION: Do NOT unscrew the 2 unmarked screws in the
middle). Take the bottom plate with the mounted pcb out. Remove the worn batteries and
replace them with two new batteries (type CR2032, 3V Lithium cells). Make sure that polarity
is correct (the "+" sign must be on top). Insert the bottom plate and screw it tight.

1.8 External IR remote control

The CD 6.2 can be connected to an external IR receiver by using the IR jack (31). The plug is
a 3,5mm stereo headphone plug.
Pin configuration of IR connectors (31)
3,5mm stereo
infrared input
GND IR-Signal +5V supply
9