Table of Contents
Advertisement
Mirage Reinigungstechnik
7. RESIDUAL RISKS
The machine has been designed and built to ensure at all times the maximum safety for the operator;
however, there are unavoidable risks.
ATTENTION !
Please note that all personnel involved in the use, maintenance, and cleaning of the plant must be aware
of the safety standards of it.
SYMBOL
The machine is not provided with a system that allows to keep the machine braked; it is
therefore necessary that the machine is used on flat surfaces. In case it is positioned
on ramps or inclined floors, it must be lowered the wiper-floor that allows to keep the
position of the machine.
The machine is hand-carried on and it can be full of liquid aspirated or to be used, it is
recommended, therefore, always proceed slowly on the go
During the charging of the batteries make sure that the machine is away from heat sources and
corrosive environments.
The risk of corrosion is due to acid contained into the battery, in case of battery replacement be
sure to wear protective glasses and gloves.
The risk of squashing is due:
- Presence of moving parts inside the machine. During installation / maintenance make sure that
the power is switched off by the key on the control panel.
- At the brush and wiper floor adjustment . In particular, pay attention to the possible lower limbs
squashing resulting in lowering of the floor wiper.
The machine can create areas where it can form puddles of water or other liquid that can
generate a risk of falling. Use non-slip footwear as personal protective equipment.
Before performing any maintenance work, the technician must make sure that there are no live
parts.
In the following figures 1,2,3 have been reported the main components of the FKC 46 scrubber dryers,
while in figures 4,5,6 have been reported the main components of the FKC 36. For identifying each of them
it is refered to the "DRYER COMPONENTS FKC" tables in the queue to FIGS.
_____________________________________________________________________________________
LIBRETTO USO E MANUTENZIONE
To limit these risks, please remember to respect all information given in this
manual, do not force or inhibit the safety of the machine and always wear
personal protective equipment provided for
EXPLOSION AND CORROSION RISKS
Presence of live parts: it is prohibited to touch any live parts.
DANGER OF SLIPPING, TRIPPING OR FALLING
PROHIBITION TO CARRY OUT JOBS WHEN THE MACHINE IS IN CHARGING
DESCRIPTION
LOSS OF STABILITY
SHOCK HAZARD
DANGER OF CRUSHING
pagina 7
FKC 36 e FKC 46
Advertisement
Table of Contents
