Table of Contents
Advertisement
Mirage Reinigungstechnik
ATTENTION !
The figure below shows the correct way to perform the operation of the battery charge.
FKC 46
Electrical
connections
16.
FUNCTIONING
16.1
DASHBOARD
The control panel consists of a series of switches, displays and buttons that enable / disable all functions of
the machine, there is also a key switch that allows to disconnect the power supply. Each switch is
associated with a pictogram / symbol that represents the function performed.
_____________________________________________________________________________________
LIBRETTO USO E MANUTENZIONE
When the scrubber dryer is not in charge, it must always be equipped with the
cap on the plug input of battery charging
The battery charger must be
connected to a fixed feed
point
provided
effective hearth contact and
controlled
devices
against
and leakage current.
It is recommended that the
electrical
protected in accordance with
current legislation.
with
an
by
switching
overload
feed
point
is
pagina 18
FKC 36 e FKC 46
FKC 36
Electrical
connections
Advertisement
Table of Contents
