Table of Contents
Advertisement
Mirage Reinigungstechnik
13.
STANDARD DOTATION
It is recommended to check the machine upon delivery. It must be intact and have in endowment:
for Scrubber dryer FKC 36:
o Battery 12V 80Ah AGM
o Battery charger 12V 8Ah included
o Brush PPL60
o Accessory for brush removing
o Battery charger cap
o N° 2 Squeegees in LATEX
for Scrubber dryer FKC 46:
o N°2 Batteries da 12V 110Ah AGM
o Battery charger 24V 11Ah included
o Brush PPL60
o Accessory for brush removing
o Battery charger cap
o Squeegee in LATEX and PPU
14.
HANDLING AND TRANSPORT
Before every movement always make sure that the lifting device with its tools is suitable to lift the load to
be moved and has the stability needed to perform the operation.
During these operations use appropriate safety guards.
Alberti International Srl, in according with the transport mode, uses packaging adequate to ensure the
integrity and preservation during the same.
To transport the machines, you must:
1. Place the body of the scrubber-dryer on a pallet and secure it.
2. Lock scrubber dryer fixing it to the pallet.
3. Place the forks of the lifting equipment under the pallet, check the degree of stability of the system, the
package shall be handled with extreme care and it is forbidden to overlap each other the items.
To handle the machine, simply press down lightly. The FKC 46 is provided with support wheels (ref.9
Figure 2) for the movements, despite the size and the weight, from this position it is possible to pushing it
manually and easily
The dimensions and the weight of FCK 36 are reduced and the support wheels are sufficient for the
handling / transport of the machine. It is also equipped with special handles located on the sides of the
brushes' support to facilitate transportation.
ATTENTION !
_____________________________________________________________________________________
LIBRETTO USO E MANUTENZIONE
Check weights, capacities and dimensions into the paragraph "Technical data".
Move the machine only on flat floors, regular and compact, do not move the
machine on slope floors.
The subjects not involved in the operation should keep the safety distance.
pagina 16
FKC 36 e FKC 46
Advertisement
Table of Contents
