Advertisement
5
Installing the server on the rails.
Carefully hold the server and tilt it into position
over the rails, and then slowly lower the rear of the
server on the rails 1 . Make sure that the server
sits on the rails securely and push the server 2 all
the way into the rack.
If the server comes with latches, the latches click
into place when the server is securely installed in
the rack.
12
6
Tightening the front thumbscrews (for specific
models).
Depending on your server model, thumbscrews are
available on the front of the server. If they are
available, remember no rack brackets will be
present. When you move the rack cabinet, or if you
install the rack cabinet in a vibration-prone area,
tighten the two thumbscrews on the front of the
server to secure the server in the rack cabinet.
Advertisement
