Declaration Of Conformity / Ce Marking - REXROTH PSG series Operating Instructions Manual

1070087062 / 04 | PSG xxxx
2.6.8

Declaration of conformity / CE marking

High dynamic forces and extremely fast movements
Danger of impacts, bruises, entanglement and burns!
You should always be aware of the possibility that motions can be
"
triggered by faults of the system and behave with the appropriate
care and sense of responsibility.
" Always stay outside the danger area of the welding system when it
is running!
Do not ever deactivate any safety–relevant functions!
"
Robots and fixing elements may generate very high dynamic
forces and extremely fast movements. In addition, expulsion may
occur during a welding schedule.
Non-approved spare parts
Possibility of reduction of safety of persons/systems, function
disturbances/restrictions!
" Only use spare parts approved by us.
For details on declaration of conformity/on the CE-mark, please refer
to page 157.
" The evaluation of the electrical and mechanical safety, the environ­
mental influences (foreign bodies, moisture) must be carried out on
the final product when installed.
When installed in an enclosure, the EMC properties of this product
may be subject to change. For this reason, the final product (end
user device, machine, systems) should be subjected to a verification
of its EMC characteristics by the end product manufacturer.
Electric Drives | Bosch Rexroth AG
and Controls
WARNING
105 / 170
Safety instructions