Gazer CM-272-100 User Manual page 9

When running the system for the first time, one must adjust some of its settings:
•
Use the «Steering wheel buttons» icon to access the settings for the car steering wheel buttons (in Gazer universal multimedia systems).
•
To change the Gazer multimedia system boot logo, go to «Settings» – «Factory settings». Enter the password using the popup keyboard, (gazercms –
set by default). Open «Boot Logo» and choose the one you like.
•
If the front panel buttons are not working properly, please make sure that the front panel buttons settings correspond to the settings of this specific
model. To do this, go to «Settings» – «Factory settings». Enter the password in the next window (gazercms – set by default). Using «Front panel
settings» choose the right model of the device. Use the arrow in the top left corner to exit. After that restart your device – switch off the ACC power
and turn it back on in ten seconds.
•
To achieve the maximum surround sound effect, adjust the per-channel sound delay setting for all speakers in your vehicle (additional information can
be found in the user manual or on the following website www.gazer.com – click «Support»).
•
If the multimedia system does not work properly, simply restart the device. To do that, either switch off the ACC power or press the «RST» button on
the front panel. Another way to restart the system is to press and hold the start button (hold it for ten seconds until you hear three beeps). If the
problem was not resolved, revert the device to factory settings.
Warning! When you revert the device to factory settings, all the data (downloaded application and Google account) will be deleted. If the «Empty SC
card» option is chosen, all the data from the memory card will be also deleted.
If you have any other issues, not described in the user manual or in the this setup manual, please submit a query to Gazer contact center, using the feedback
form on the website www.gazer.com.
Warning!
Incorrect connection may void the warranty.
In case of malfunctions, please consult with the Gazer contact center first before sending your device for maintenance.
Installation/removal of the device is not included in the warranty service.
First run of the system
ENG
9