Gazer CM-272-100 User Manual page 5

Please read this manual carefully before connecting and using your Gazer multimedia system. Keep this manual for future reference.
This Gazer multimedia system is designed for installation in a specific car or car model range. Gazer multimedia systems are connected and installed as Plug&Play
devices. The system supports the control bus and CAN BUS data transfer.
When the system is connected to the CAN BUS via a special module, it is controlled by the car's onboard computer (on/off options, information about the climate
control system, steering wheel buttons control, vehicle speed information, door sensors and other features (supported by CAN BUS of a specific vehiclel). The
user can program the control buttons on the steering wheel on his/her own.
Additional cables and adapters are available for every specific vehicle to ensure maximum integration of the multimedia system with a car. This includes, for
example, connection to standard USB and AUX plugs, to the original rear view camera (including the component video out), as well as to additional duplicating
monitor.
•
Power supply cable
•
8Gb (Class 10) Gazer micro SDHC memory card + SD adapter
•
GPS antenna
•
USB WI-FI adapter
•
Velcro tape
•
2 CVBS-out cable
•
AV-in stereo cable
*Depending on the model
Gazer multimedia systems
Congratulations on your purchase of this Gazer multimedia system!
Gazer multimedia system package
•
Rear panel USB cable
•
Line-level audio output 5.1
•
External microphone
•
Front panel mini USB-USB cable *
•
Additional mount*
•
FM adapter *
•
CAN adapter *
ENG
5