Stihl MS 460 Instruction Manual page 65

English / USA
25= Depth Limiter ("Special Accessory")
26= Star knob ("Special Accessory")
64
Definitions
1. Carburetor Box Cover Twist
Lock.
Lock for carburetor box cover.
2. Spark Plug Boot.
Connects the spark plug with the
ignition wire.
3. Carburetor Adjusting Screws.
For fine tuning the carburetor.
4. Wrench Holder.
To hold the wrench.
5. Chain Brake.
A device to stop the rotation of the
chain if activated in a kickback
situation by the operator's hand or
by inertia.
6. Chain Sprocket.
The toothed wheel that drives the
saw chain.
7. Chain Sprocket Cover.
Covers the clutch and the sprocket.
8. Chain Tensioner.
Permits precise adjustment of chain
tension.
9. Bumper Spike.
Toothed stop for holding saw steady
against wood.
10. Guide Bar.
Supports and guides the saw chain.
11. Oilomatic Saw Chain.
A loop consisting of cutters, tie
straps and drive links.
j
12. Chain Catcher.
Helps to reduce the risk of operator
contact by a chain when it breaks
or comes off the bar.
13. Splatter Shield.
Helps to shield the crankcase and
the muffler from cutting debris.
14. Oil Filler Cap.
For closing the oil tank.
15. Muffler.
Reduces engine exhaust noise and
directs the exhaust gases.
16. Front Hand Guard.
Provides protection against
projecting branches and helps
prevent left hand from touching the
chain if it slips off the handlebar.
17. Front Handle.
Handle bar for the left hand at front
of saw.
18. Starter Grip.
The grip of the starter, for starting
the engine.
19. Fuel Filler Cap.
For closing the fuel tank.
Rescue Saw