Chain Lubricant - Stihl MS 460 Instruction Manual

English / USA
Closing the cap
: Fit the cap - grip upright -marks
must line up.
: Turn the cap clockwise as far as
stop (approx. a quarter turn).
: Fold the grip flush with the top of the
cap.
If the grip does not lie completely flush
with the cap and the detent on the grip
does not engage the recess in the filler
neck, the cap is not properly seated and
tightened and you must repeat the
above steps.
36
Change the fuel pickup body
once every year
: Drain the fuel tank.
: Use a hook to pull the fuel pickup
body out of the tank and take it off
the hose.
: Push the new pickup body into the
hose.
: Place the pickup body in the tank.

Chain Lubricant

The use of a semi-synthetic chain
lubricant, e.g. STIHL chain and bar
lubricant, is recommended for rescue
saw usage because of the extended out-
of service periods expected.
Warning!
Do not use waste oil!
Medical studies have shown that
renewed contact with waste oil can
cause skin cancer. Moreover, waste is
environmentally harmful!
Waste oil does not have the
necessary lubricating properties
and is unsuitable for chain
lubrication.
Rescue Saw