Door Care Instructions - Kenmore 721.9604 series Use & Care Manual

LOWER OVEN
Removing the Door
1. Fully open the door.
2. Unlock the hinge locks, rotating them as far toward the
open door frame as they will go.
Slot
Hinge
lock
3. Firmly grasp both sides of the door at the top.
4. Close the door to the removal position (approximately
five degrees) which is halfway between the broil stop
position and fully closed. If the position is correct, the
hinge arms will move freely.
5. Lift door up and out until the hinge arms are clear of the
slots.
Lock
Unlock
about 5°
Replacing the Door
1. Firmly grasp both sides of the door at the top.
2. With the door at the same angle as the removal position,
seat the indentation of the hinge arms into the bottom
edge of the hinge slots. The notch in the hinge arms must
be fully seated into the bottom edge of the slots.
Hinge arm
3. Open the door fully. If the door will not open fully, the
indentation is not seated correctly in the bottom edge of
the slots.
4. Lock the hinge locks, rotating them back toward the slots
in the oven frame until they lock.
5. Close the oven door.

DOOR CARE INSTRUCTIONS

• Most oven doors contain glass that can break.
CAUTION
• Do not close the oven door until all the oven racks are
fully in place.
• Do not hit the glass with pots, pans, or any other
object.
• Scratching, hitting, jarring, or stressing the glass may
weaken its structure causing an increased risk of
breakage at a later time.
CARE AND CLEANING 35
Bottom edge
of slot
Indentation
Hinge arm
Hinge lock