Series 2200 Programmable DC Power Supplies Reference Manual
Rear panel at a glance
The rear panel of the Series 2200 contains the following items:
•
Cooling vents
•
Factory test port
•
USB device port
•
GPIB IEEE-488 port
•
110 V/220 V power connector
•
12-pin connector; includes remote sense
•
Shorting clip. Use this for proper regulation when not using remote sense. This connector comes
installed. It shorts the + drive to the + sense and the - drive to the - sense. To use remote sense,
remove the clip.
The rear panel of the Series 2200 is shown in the following figure.
(1) Cooling vents
Exhaust vent for the internal cooling fan. Keep the vent free of obstructions to prevent overheating.
2200S-901-01 Rev. C / March 2016
Figure 4: Rear panel
Section 2: General operation
2-13