Status:operation:enable - Keithley 2200 series Reference Manual

Section 4: Command reference

STATus:OPERation:ENABle

Group
Syntax
Related
Commands
Arguments
Returns
Examples
4-28
Series 2200 Programmable DC Power Supplies Reference Manual
SRER have the binary value 00100000.
This command sets and queries the contents of the operation
enable register (OENR). The OENR is an eight-bit mask register
that determines which bits in the Operation Event Register (OEVR)
will affect the state of the OPER bit in the Status Byte Register
(SBR). Details about the status registers are available in Appendix
C, Registers (on page C-3).
Status
STATus:OPERation:ENABle <NR1>

STATus:OPERation:ENABle?

STATus:OPERation:ENABle
STATus:OPERation[:EVENt]? (query only)
<mask>::=<NR1>
where:
<NR1> is a decimal integer ranging from 0 through 255. The binary
bits of the OENR are set according to this value.
<mask>
STATUS:OPERATION:ENABLE 8
STATUS:OPERATION:ENABLE? might return 8, which would
indicate that only the Constant Current bit of the Operation Event
Register would affect the OPER bit of the Status Byte Register.
(on page 4-29)
2200S-901-01 Rev. C / March 2016