Product Safety Information; Product Specifications - Ingersoll-Rand 2015MAX SERIES Product Information

Product Safety Information

Intended Use:
These Air Impact Wrenches are designed to remove and install threaded fasteners.
For additional information refer to Product Safety Information Manual Form 04580916.
Manuals can be downloaded from ingersollrandproducts.com.
The exposed metal housing of the tool can become hot under abnormal operating conditions.
Do not operate for extended periods of time at free speed.
Power Management System
For models that include a power management system, the system allows operator reduction of
maximum output power in the forward direction. The power management system does not affect the
output power in the reverse direction.
To adjust the power, rotate the Power Regulator to the desired level indicator.
The power level indicators are for reference and DO NOT indicate a specific power. The power output can
be further reduced in forward or reverse by using the variable throttle.

Product Specifications

Model Style
2015MAX Angle
2025MAX Angle
Impacting Sound Level dB(A)
Model
† Pressure (L
2015MAX 96.6
2025MAX 96.6
† K = 3dB measurement uncertainty
pA
‡ K = 3dB measurement uncertainty
wA
* K = Vibration measurement uncertainty
Sound and vibration values were measured in compliance with internationally recognized test
standards. The exposure to the user in a specific tool application may vary from these results.
Therefore, on site measurements should be used to determine the hazard level in that specific
application.
45537560_ed3
Drive
Impacts
per min.
Type Size
Square 3/8"
Square 1/2"
(ISO15744)
) ‡ Power (L )
p w
107.6
107.6
CAUTION
Recommended Torque Range
Forward
ft-lb (Nm)
45-140 [150 Max]
2100
(61-190 [203 Max])
45-140 [150 Max]
2100
(61-190 [203 Max])
Free Speed Sound Level dB(A)
(ISO15744)
Pressure
94.1
94.1
WARNING
Reverse
ft-lb (Nm)
45 - 160 [180 Max]
(61 - 217 [244 Max])
45 - 160 [180 Max]
(61 - 217 [244 Max])
Vibration (m/s²)
(ISO28927)
Power Level
105.1 17.4
105.1 17.4
EN
*K
3.0
3.0
EN-1