Manual Recording; Scheduled Recording - Q-See QT5116 User Manual

BASIC FUNCTIONS
Step 2:Set Video quality, Frame rate and Resolution.
Step 3:Check Audio if you input audio and want to record. Check Time stamp to record date and time information.
Step 4: Enable recording function for cameras in Record option.
Note: If you have a camera unchecked here, it will not record in any recording mode.
Step 5: Set Alarm record hold time. It is for post alarm recording.
Step 6: Enable Recycle. It replaces old video with new files after HDD is full. If you have it unchecked, it will stop
recording automatically once HDD is full.
Step 7:Click OK to finish
Note: The higher the Video quality, Frame rate and Resolution, the more storage space is used every hour.
This Unit supports pre-alarm recording. There is no option to set the pre-alarm recording time, the default
is 10 seconds

3.3.2 Manual Recording

Press the REC button on the front panel after quitting system setup. Press Stop button to stop recording.
Press the REC button on remote control, click again to stop.
Click the REC button on the control bar (fig 4.1) with the mouse. Click again to stop recording.

3.3.3 Scheduled Recording

Users can schedule different recording times for every day of the week. If you want a special schedule for one day,
you can use the Holiday function.
Step 1: Enter SCHEDULE configuration. Select cameras and Always, see Fig 3.9 Schedule Setup.
Step 2: The first column lists the 7 days of the week. The rows show 24 hours. Set the schedule time.
Green means checked. Transparent means unchecked.
or
or
Fig 3.9: Schedule Setup
17 | P a g e
QT518 & QT5116 User Manual