Ricoh G-P3 Service Manual page 270

Sets the length of the timeout for the search of the LDAP server.
AddtB Acl Info
This SP must be executed immediately after installation of an HDD unit in a basic machine
that previously had no HDD. The first time the machine is powered on with the new HDD
5846 041
installed, the system automatically takes the address book from the NVRAM and writes
it onto the new HDD. However, the new address book on the HDD can be accessed only
by the system administrator at this stage. Executing this SP by the service technician
immediately after power on grants full address book access to all users.
5846 043 AddrB Media
IniSet/All AddrB
This SP clears all the setting information managed in UCS and address book information
5846 046
(local, delivery, LDAP) and restores these settings to their default values. Use this SP to
initial the account information (user codes and passwords) for system managers and users
as well.
Ini Local AddrB
5846 047
Clears the local address book information, including the user code.
Ini LDAP AddrB
5846 049
Clears the LDAP address book information, except the user code.
Init All AddrB
5846 050
Clears all directory information managed by UCS, including all user codes.
Turn off and on the main power switch after executing this SP.
Bkup All AddrB
5846 051
*CTL
Displays the slot number where an address book
data is in.
[0 to 30 / - /1]
0: Unconfirmed
1: SD Slot 1
*CTL
2: SD Slot 2
4: USB Flash ROM
20: HDD
30: Nothing
*CTL
*CTL
*CTL
Initializes all address information data except the
*CTL
administration account.
*CTL
Service Mode Table
5
269