Ricoh G-P3 Service Manual page 249

5. Service Tables
3821 009 9
3821 010 10
SP5-XXX (Mode)
5001 [All Indicators On]
5001 001
5024 [mm/ inchDisplay]
5
5024 001
5045 [Accounting count]
5045 001 Counter Method
5051 [Refill Toner Disp] Toner Refill Display
5051 001 Refill Toner Disp
5055 [Display IP address]
5055 001 Display IP address
248
*EGB
*EGB
Checks the LED on the operation panel.
*CTL
0: Normal, 1: All lit
Sets units (mm or inch) for custom paper sizes.
*CTL [0 or 1 / 1 /-]
0: mm (EU/AS), 1: inch (NA)
Selects the counting method if the meter charge
mode is enabled with SP5-930-001.
*CTL
[0 to 2 / 1 / -]
0: Developments, 1: Pages, 2:Coverage range
Enable or disable the warning display when you
install a toner bottle that was refilled by third party
venders.
*CTL
[0 or 1 / 0 / -]
0: Enable, 1: Disable
Display or does not display the IP address on the
LCD.
*CTL
[0 or 1 / 0 / -]
0: Not display, 1: Display