Ricoh G-P3 Service Manual page 257

5. Service Tables
5816 007 SSL Disable
5816 008 RCG Connect T/O
5816 009 RCG Write Timeout
5816 010 RCG Read Timeout
5
5816 011 Port 80
5816 021 Function Flag
5816 022 Install Status
Connect Mode (N/M)
This SP displays and selects the Cumin connection method.
5816 023
0: Internet connection
1: Dial-up connection
NotiTime ExpTime
5816 061
Proximity of the expiration of the certification.
HTTP Proxy use
5816 062
This SP setting determines if the proxy server is used when the machine communicates
with the service center.
HTTP Proxy Host
5816 063
256
1: On (The remote service function is enabled.)
[0 to 1 / 0 / 1/step]
*CTL
0: On, 1: Off
Sets the timeout counter for the remote connection.
*CTL
[1 to 90 / 10 / 1 second/step]
Sets the timeout counter for writing processing.
*CTL
[0 to 100 / 60 / 1 second/step]
Sets the timeout counter for reading processing.
*CTL
[0 to 100 / 60 / 1 second/step]
Enables or disables access to the SOAP method
via port 80.
*CTL
[0 to 1 / 0 / 1/step]
0: Disables, 1: Enables
[0 or 1 / 0 / -]
*CTL
0: Not registered, 1: Registered
This SP displays the Cumin installation status.
0: Basil not registered
*CTL
1: Basil registered
2: Device registered
*CTL
*CTL
*CTL
*CTL