Hilti TE106 Operating Instructions Manual page 23

Rated
110 V
voltage
Rated 800 W
power
input
Rated cur- 8.3 A
rent input
Mains 60 Hz
frequency
3.2 J
Single
impact
energy
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a
standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure. The declared vibration emission level represents the main applications of
the tool. However if the tool is used for different applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly increase the exposure level over the total working
period. An estimation of the level of exposure to vibration should also take into account the times when the
tool is switched off or when it is running but not actually doing the job. This may significantly reduce the
exposure level over the total working period. Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of
work patterns.
Additional information in accordance with EN 60745-1
Triaxial vibration values (vibration vector sum) for
the 110V/ 50Hz model
Chiseling, a
h, Cheq
Uncertainty (K)
Triaxial vibration values (vibration vector sum) for
the 230V/ 50Hz model
Chiseling, a
h, Cheq
Uncertainty (K)
Noise information (measured in accordance with EN 60745):
Typical A-weighted sound power level
Typical A-weighted emission sound pressure level.
Uncertainty for the given sound level
Other information about the power tool
Chuck
Chuck
Protection class
Printed: 07.07.2013 | Doc-Nr: PUB / 5070792 / 000 / 00
110 V 120 V
700 W 850 W
7.8 A 7.9 A
50 Hz 60 Hz
2.4 J 3.2 J
220 V 220 V
800 W 700 W
4.5 A 4.4 A
50 Hz 60 Hz
3.2 J 3.2 J
Measured in accordance with EN 60745 2 6
7.9 m/s
1.5 m/s
Measured in accordance with EN 60745 2 6
14 m/s
1.5 m/s
100 dB (A)
89 dB (A)
3 dB (A)
TE C (SDS-plus)
TE T (SDS-top)
Protection class II (double insulated)
230 V 240 V
850 W 850 W
4.5 A 4.2 A
50 Hz 50 Hz
3.2 J 3.2 J
19
en