Hilti TE 2-A22 Operation Instructions Manual
Hide thumbs
Also See for TE 2-A22:
- Operating instructions manual (250 pages) ,
- Manual (200 pages) ,
- Original operating instructions (196 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Hilti TE 2-A22
Summary of Contents for Hilti TE 2-A22
- Page 1 TE 2-A22 English Printed: 27.07.2016 | Doc-Nr: PUB / 5293055 / 000 / 00...
- Page 2 Printed: 27.07.2016 | Doc-Nr: PUB / 5293055 / 000 / 00...
- Page 3 Revolutions per minute 1.4 Product information Hilti products are designed for professional use and may be operated, serviced and maintained only by trained, authorized personnel. This personnel must be informed of any particular hazards that may be Printed: 27.07.2016 | Doc-Nr: PUB / 5293055 / 000 / 00...
- Page 4 The type designation and serial number are printed on the type identification plate. ▶ Write down the serial number in the table below. You will be required to state the product details when contacting Hilti Service or your local Hilti organization to inquire about the product. Product information...
- Page 5 ▶ Maintain power tools properly. Check that moving parts are in correct working order and do not jam, and check whether any parts are broken or so damaged that correct operation of the power tool cannot be guaranteed. If any parts are damaged, have these parts repaired before using the tool.
- Page 6 Printed: 27.07.2016 | Doc-Nr: PUB / 5293055 / 000 / 00...
- Page 7 Printed: 27.07.2016 | Doc-Nr: PUB / 5293055 / 000 / 00...
- Page 8 3 Description 3.1 Parts, operating controls and indicators Printed: 27.07.2016 | Doc-Nr: PUB / 5293055 / 000 / 00...
-
Page 9: Operation
Rotary hammer, side handle, depth gauge, operating instructions. The TE DRS-S dust removal module greatly reduces dust emissions and is available as an accessory. You can find other system products approved for your product at your local Hilti Center or online at: www.hilti.com 4 Technical data 4.1 Rotary hammer... - Page 10 5.1.1 Fitting the side handle 1. Release the side handle clamping band by turning the handle grip. 2. Slide the side handle clamping band over the chuck from the front and into the recess provided. 3. Bring the side handle into the desired position. 4.
- Page 11 5.1.4 Fitting the accessory tool 1. Apply a little grease to the connection end of the accessory tool. ◁ Use only the recommended grease supplied by Hilti. Use of the wrong grease can result in damage to the tool. 2. Push the accessory tool into the chuck as far as it will go (until it engages).
- Page 12 5.1.6 Fitting the depth gauge (optional) 1. Release the side handle clamping band by turning the handle grip. 2. Slide the depth gauge from the front into the 2 guide holes provided. 3. Tighten the side handle clamping band by turning the handle grip. 5.2 Types of work Warning! Risk of damage! ▶...
- Page 13 5.2.3 Drilling without hammering ▶ Set the function selector switch to this symbol: 5.2.4 Hammer drilling ▶ Set the function selector switch to this symbol: 6 Care and maintenance 6.1 Care and maintenance of cordless tools WARNING Danger of electric shock! Carrying out care and maintenance while the battery is fitted presents a risk of serious physical injury and burning injury.
-
Page 14: Troubleshooting
▶ Clean the dust shield on the chuck with a dry, clean cloth at regular intervals. ▶ Clean the sealing lip by wiping it carefully and then grease it again lightly with Hilti grease. ▶ It is essential that the dust shield is replaced if the sealing lip is damaged. - Page 15 Remove the battery and keep it under observation. Allow it to cool down. Contact Hilti service. The rotary hammer has been over- ▶ Select a tool that is suitable for loaded (application limit exceeded). its intended use.
- Page 16 Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, your old tools, machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative for further information.
- Page 17 Printed: 27.07.2016 | Doc-Nr: PUB / 5293055 / 000 / 00...
- Page 18 Hilti = registered trademark of Hilti Corp., Schaan 20160726 Printed: 27.07.2016 | Doc-Nr: PUB / 5293055 / 000 / 00...