Technical Data - Hilti TE 704 Operating Instructions Manual

1
2
3
1
2
3
4
5
Printed: 07.07.2013 | Doc-Nr: PUB / 5071185 / 000 / 00
Hilti TE 704 breaker
Kit supplied with the machine:
Plastic case, cleaning cloth, Hilti insert tool
grease, operating instructions
Always wear ear Always wear pro- Always wear safety
protectors. tective gloves. glasses.
Do not use this product in any way other
than as directed by these operating in-
structions.
6

Technical data

Power input:
Voltage (versions):
Current input:
Frequency:
Machine weight:
Dimensions:
Hammering speed under load:
Single impact energy:
Chiselling performance in medium-hard concrete: 500 cm
Chisels:
Chuck:
Chisel cutting edge adjustment to 18 positions
Permanent lubrication
Adjustable side handle
On/off switch for continuous running
Electronic r.p.m. regulation for improved operating convenience
Hammering power regulation: max. = 100%, min. = 50%
Double insulation, class II
Service indicator with warning lamp
Noise and vibration
The sound power level of the machine is less than 108 dB (A)
Wear ear protection.
The typical weighted acceleration is 11 m/s
The respective regulations of your trade association and the enclosed safety pre-
cautions must be observed.
Right of technical modifications reserved.
1030 W
100 V, 1 10 V, 1 15 V, 230 V, 240 V
1 1 A, 10 A, 5 A
50–60 Hz
6.5 kg
515×215×1 15 mm
1940/2740 blows/min.
4.3 joules / 8.5 joules
3 /min. with standard SM36 chisel
Pointed, narrow flat, wide flat, extra
wide flat, hollow, channel (narrow or
wide) scoop, in standard version
TE-Y
2 .