Step 2. Updating The Junos Software With The Cli; Step 3. Adding Licenses With The Cli; Step 4. Configuring Basic Settings With The Cli - Juniper J2300 Quick Start Quide

J-series Services Router Quick Start

Step 2. Updating the JUNOS Software with the CLI

After starting up the Services Router, you might want to download the latest version
of the JUNOS software from the Juniper Networks Web site and load it onto the
router. You can use the CLI, but we recommend the J-Web interface for the download.
To update the JUNOS software with the CLI:
1.
2.
For complete instructions, see the J-series Services Router Administration Guide.

Step 3. Adding Licenses with the CLI

If you purchased one or more licenses, you received an envelope with instructions
for obtaining license keys from the Web. To enable each license on the router, you
must add the license key. You can add one or more license keys from the CLI.
To add a license key and enable a license:
1.
2.
For complete instructions, see the Getting Started Guide for your router.

Step 4. Configuring Basic Settings with the CLI

In CLI configuration mode, you use the
delete
configuration on the router until you use the
To configure basic settings with the CLI:
1.
14
Basic Connection and Configuration with the CLI
Go to http://www.juniper.net/support
software for J-series routers to an FTP server.
Download the JUNOS software to the router with the CLI or J-Web interface:
root> request system software add validate unlink reboot source
Follow the instructions in your license envelope to generate the license key from
the Web site.
Copy the license key onto the router with the CLI:
Type the following command, and press Enter:
a.
root> request system license add terminal
When prompted, copy and paste the license key from the Web site at the
b.
command line, separating multiple license keys with a blank line.
To exit license key entry, press Ctrl+D.
c.
command to disable them. The commands you enter do not update the active
From the CLI, enter configuration mode:
root> configure
root#
, and follow the links to download the JUNOS
command to enable features, and the
set
commit command.