Juniper J2300 Quick Start Quide page 17

Possible completions:
accounting Show accounting profiles and records
aps Show Automatic Protection Switching information
arp Show system Address Resolution Protocol table entries
as-path Show table of known autonomous system paths
bfd Show Bidirectional Forwarding Detection information
bgp Show Border Gateway Protocol information
chassis Show chassis information
class-of-service Show class-of-service (CoS) information
cli Show command-line interface settings
configuration Show current configuration
connections Show circuit cross-connect connections
dialer Show dialer information
dlsw Show DLSw information
---(more 93%)---
To use command completion, type the first few letters of a command and press the
Spacebar or the Tab key.
For example, when you type the following partial command, the system completes
the command
show chassis hardware
root> sh<tab> ch<tab> h<tab>
Hardware inventory:
Item Version
Chassis
Routing Engine RevX1.8
FPC 0 RevX1.5
PIC 0
Type the following partial command to display the JUNOS software version running
on the router:
root> sh ver
Hostname: host
Model: j2300
JUNOS Software Release [8.0-20060607.0] (Export edition)
To access configuration mode, enter the
to a pound sign (#).
root> configure
root#
To activate changes to the configuration, enter the
root> commit
root#
To exit configuration mode, enter the
to exit the CLI completely.
root# exit
root> exit
root@%
and displays hardware information:
Part number Serial number
JN000212AA
710-009989 CORE97133
710-009991 CORE96352
command. The prompt changes
configure
commit
command. Use the
exit
JUNOS CLI Basics
Description
J2300
RE-J.1
FPC
2x FE, 2x Serial
command.
command again
exit
17
JUNOS CLI Basics