Camera Switches And Ports / Connecting To Wifi Device / Connecting To Wifi Computer - National 167 Series Instructions For

Camera Switches and Ports – Limited Production
This feature is limited to a small production batch, not a standard feature of this camera.

When the switch is in USB mode – The camera will only transmit one of two ways. It will transmit to
either the tablet via the supplied coiled USB cable or through an optional A-Male to Mini-B USB 2.0.
(Available to purchase through any electronics supply dealer) Motic Images 3.0 required for the
computer connection. The light on the camera will not turn on in this mode.

When the switch is in WiFi mode – The camera will only transmit out in WiFi. The light on the camera
will turn blue, indicating it is transmitting. The image will not be available on the tablet in this mode.
When placing the switch in the WiFi mode, the power adapter must be connected to the camera. The cable
supplies power to the camera.
Camera Switch

Switch on WiFi – No Tablet Connection – Power must be plugged in

Switch on USB – Tablet / Computer* Connection
*Motic Images 3.0 required – see page 21*
Connecting your WiFi enabled device to the BTW camera
1. Download the MotiConnect app from the App Store, Google Play, or Chrome Store.
2. Connect the camera to the power supply.
3. Switch the camera to WiFi transmission mode.
4. Turn on your WiFi enabled device and connect to the SSID provided on the camera: MCX_BTW_XXXX
You will connect to the camera as you would any WiFi router.
5. Default password is always: 12345678
6. Start the MotiConnect application. The connection should be automatic.
7. You can now view the image live on the MotiConnect app as well as capture, measure and annotate the image
using the tools provided.
8. You can connect up to 5 other tablets or other WiFi devices to the BTW signal at the same time in order to
share the live image.
Connecting your WiFi enabled computer to the BTW camera
The BTW camera can also be used with Motic Images Plus software for Windows computers. If you have a WiFi
enabled laptop or computer you can install Motic Images Plus from the CD provided.
1. Connect the camera to the power supply.
2. Switch the WiFi transmission mode.
3. Connect to the SSID provided on the camera: MCX_BTW_XXX - You will connect to the camera as would
any WiFi router.
4. Default password is always: 12345678
5. Start the Motic Images application – Click File – Click Capture
6. The Motic Live Imaging window will open.
7. The Imaging Device box should have the Moticam X selected and you should now have an image.
Camera Reset
22
Camera Power /
Mini USB
WiFi