Tablet Accessories - National 167 Series Instructions For

TABLET ACCESSORIES

Please Note: Items included may differ
in appearance from items pictured
above
HDMI Cable
Power Adapter
Calibration Slide
C-Ring
4GB Micro-SD
Mini USB to
Micro USB
USB to Micro
USB
USB to Mini
Power Din
L-Wrench
This cable will enable you to connect to an HDMI ready device, to view
your tablet on a larger format. The displayed image will replicate the
displayed image of the tablet.
This 5V DC power adapter is for charging your tablet's battery. It is also
used to power the camera in WiFi mode.
This slide will enable you to calibrate your tablet to your microscope, for
accurate measurements. You do not need to calibrate your microscope
in order to begin using your table/microscope.
This ring is used between the camera and c-mount to achieve par-focus.
Pre-installed on MA15602 – C-Mount.
This storage card can be used with your tablet to store images and then
transfer them to your computer. This card is provided as a courtesy
and cannot be replaced. *32GB Max Supported*
Provides power and feed connection between the tablet and camera.
To operate the camera, move the switch to the camera position.
This cable when used in conjunction with the power adapter is used to
charge the tablet.
This cable is used to power the camera, in WiFi mode. This cable
can also be used to charge both the tablet and camera at the same
time. Keep plugged into camera at all times, if possible.
Optional Wrench for mounting bracket to Motic branded trinocular
microscopes
21