Camera Controls And Ports / Connecting Camera To Hd Ready Device - National 167 Series Instructions For

CAMERA CONTROLS AND PORTS
CONNNECTING CAMERA TO HD READY DEVICE
1. Connect the HDMI Cable, included with your camera, to the back of the D-Moticam 1080. Connect one end of
the HDMI cable (end with screw) to the 1080 and then connect the other end of the HDMI cable to the back of
your HD Ready device (Monitor, Projector, HDTV, etc..).
This USB port can also be used to connect a USB mouse so that the
camera can be controlled without a computer. The USB connection can
be used to connect the Moticam 1080 directly to a computer (not
recommended) to be used with the provided Motic Images Plus software.
HDMI port for connecting to an HDMI ready display (the cable is provided
in the Moticam 1080 box).
DC 12V Power port for connecting the included Power Supply.
SD Card slot for capturing images and video files onto an SD card. The
maximum size compatible is 32GB
Pressing this button will turn the camera on and off.
11