Fluke 1735 Getting Started page 43

Power Logger
Measuring Functions
Measurement
When selecting this measuring mode with the rotary switch the harmonics are
immediately and clearly represented on the LC display as follows:
edx030.bmp
21 Switch between the individual phases.
4 5 Switch between V and I.
Logging, Save/Enter, and Hold/Run functionality is explained earlier in this
manual.
By pressing CURSOR, you will go into Cursor mode, where you can read
additional values of the individual harmonics. With 4 5 you can select the
individual harmonics. Once the Cursor mode is activated, the scale can be
changed with the 21 from 100 %-50 % to 50 %-25 % or 10 %-5 %.
25
800.561.8187 information@itm.co
www. .com