Fluke 1735 Getting Started page 45

21 Switch between the individual phases or total view of all phases.
4 5 While viewing the individual phases, the cursor can be shifted and the
value at this location is displayed.
In the individual view, the ϕ angle is also shown.
Hold/Run and Save/Enter functionality is explained earlier in this manual.
800.561.8187
In this mode the recorder function is not available. The angle (
describes the phase shift between first harmonic active power and
first harmonic reactive power. See formula in the Measurement
Theory section for more details.
CURSOR activates the cursor function and 4 5 can be used to move
the cursor line. 21 can be used to select the phase A, B, C, (L1, L2,
L3). In Cursor mode, instantaneous values of volts and amps are at
the cursor position.
www.
Notes
information@itm.co
.com
Power Logger
Measuring Functions
edx033.bmp
ϕ
)
27