Osd Menu Setting - Axis TNS-2 series User Manual

OSD Menu Setting

To enter OSD Menu, press the button 95+Preset than OSD Main Menu is
displayed
MAIN MENU
CAMERA ID : CAM1□□□□□□□□□□□□
HOME POS : OFF
MANUAL SPEED : 150º/S
AUTO FLIP : OFF
ZOOM SPEED : FAST
DOME SETUP
ALARM : DISABLE
LANGUAGE : ENGLISH
[NEXT PAGE]
SAVE AND EXIT
EXIT
SHUTTER : FULL AUTO
MIRROR : OFF
APERTURE : 16
D ZOOM : OFF
CAMERA SET
WB MODE : ATW MODE
BLC : OFF[BLC]
D/N MODE :AUTO MODE [SLOW]
[NEXT PAGE]
EXIT
PRESET NO : 001
PRESET ID : PRESET001□□□□□□□□
PAN : 123.2 TILT : 89.2
PRESET FREEZE MODE : OFF
FREEZE ALL : OFF
SAVE
EXIT
AUTOSCAN
TOUR NO. : 01
TOUR TITLE : TOUR01□□□□□□□□□□
TOUR STEP : 01
PRESET NO. : 001
TOUR
DWELL TIME : 03
SPEED : 300º/S
SAVE
EXIT
PRIVACY
PATT NO : 01
PATT TITLE : PATTERN01□□□□□□□
PATTERN DATA FILL : 012%
SAVE
EXIT
ALARM
SECTOR NO. : 01
SECTOR ID : SECTOR1□□□□□□□□□
SECTOR START : 334.7 -1.6
SECTOR SET
SETCOR END : 000.4 08.8
SAVE
EXIT
EXIT
PTZ CAMERA
[NEXT PAGE]
SYSTEM LOCK : OFF
[PASS WORD]
[OSD DISPLAY]
[SYSTEM STATUS]
[INITIALIZATION]
[PREVIOUS PAGE]
[NEXT PAGE]
SENSE UP : X2
AGC MODE : MIDDLE
SSNR MODE : MIDDLE
COLOR : 050
DIS MODE : OFF
IRIS SET : AUTO
[PREVIOUS PAGE]
START ANGLE : 250.5 35.0
END ANGLE : 320.0 35.0
DIRECTION : CW
ENDLESS : OFF
SPEED : 10º/S
DWELL TIME : 01
SAVE AND EXIT
EXIT
PRIVACY NUMBER : 01
DISPLAY : OFF
ACTION : MOVE
SAVE
EXIT
ALARM NO. : 0.1
ALARM INPUT : OFF
ALARM ACT : 001
AUX ACT : BLC
SAVE
EXIT
014
OSD Menu Setting
A. MAIN MENU
To enter OSD Menu, press the button 95+Preset [Maxpro 90+Preset] than OSD
Main Menu is displayed.
DOME SETUP
CAMERA SET
PRESET
AUTO SCAN
TOUR
PRIVACY
PATTERN
ALARM
SECTOR
EXIT
B. DOME SET
It can be possible to enter into Main Menu by using Menu Key or 95+Preset of
controller.
CAMERA ID
HOME POS
MANUAL SPEED
AUTO FLIP
ZOOM SPEED
ALARM
LANGUAGE
[NEXT PAGE]
SAVE AND EXIT
EXIT
You can enter into Dome Set by using Controller Joystick of Left/Right after
choice Dome setup from MAIN MENU OSD.
B-1. CAMERA ID
This is for set up the ID String and Possibly exchange to other word as users
want, 16Bytes in total.
Exchange into other word by using Left/Right of controller joystick and move
Left/Right by using Zoom in/Zoom Out.
The word changed should be signed top of the left on ON/OFF Setting from
"OSD DISPLAY" MENU
PTZ CAMERA
MAIN MENU
DOME SET
: CAM1□□□□□□□□□□□□
: OFF
: 150º/S
: OFF
: FAST
: DISABLE
: ENGLISH
015