Technical Data; Jig Saw Safety Warnings - AEG STEP 80 Original Instructions Manual

TECHNICAL DATA

Jig Saw
Production code
Rated input
Stroke rate under no-load
Lengths of stroke
Bevel cuts up to
Cutting depth max. in:
Wood
Steel
Aluminium
Weight according EPTA-Procedure 01/2003
Noise information
Measured values determined according to EN 60745. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))
Sound power level (Uncertainty K=3dB(A))
GB
Wear ear protectors!
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 60745
Cutting boards
Vibration emission value a
Uncertainty K=
Cutting sheet metal
Vibration emission value a
Uncertainty K=
WARNING!
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications,
with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over
the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
WARNING! Read all safety warnings and all instruc-
tions. Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury. Save all warnings and
instructions for future reference.

JIG SAW SAFETY WARNINGS

Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring or its own cord. Cutting accessory con-
tacting a "live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
Additional Safety and Working Instructions
Use protective equipment. Always wear safety glasses when
working with the machine. The use of protective clothing is recom-
mended, such as dust mask, protective gloves, sturdy non-slip
footwear, helmet and ear defenders.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Use a dust absorption system and wear a
English
18
h, B
h, M
STEP 100 X STEP 100
4522 83 02... 4522 90 02 ...
...000001-999999 ...000001-999999
700 W 700 W
1000 - 3200 min 1000 - 3200 min
-1
20 mm 20 mm
45 ° 45 °
100 mm 100 mm
10 mm 10 mm
20 mm 20 mm
2,3 kg 2,2 kg
88,6 dB(A) 88,6 dB(A)
99,6 dB(A) 99,6 dB(A)
8,71 m/s 8,71 m/s
2
1,5 m/s 1,5 m/s
2
7,01 m/s 7,01 m/s
2
1,5 m/s 1,5 m/s
2
suitable dust protection mask. Remove deposited dust thoroughly,
e.g. with a vacuum cleaner.
Chips and splinters must not be removed while the machine is
running.
Always use the protective shields on the machine.
Do not use cracked or distorted saw blades.
Plunge cuts without pre-drilling a hole are possible with soft mate-
rials (wood, light building materials for walls). Harder materials
(metals) must first be drilled with a hole corresponding to the size
of the saw blade.
When working in walls ceiling, or floor, take care to avoid electric
cables and gas or waterpipes.
Always disconnect the plug from the socket before carrying out any
work on the machine.
Do not let any metal parts enter the airing slots - danger of short
circuit!
STEP 80
4525 91 02 ...
...000001-999999
700 W
1000 - 3200 min
-1 -1
20 mm
45 °
80 mm
10 mm
20 mm
2,2 kg
88,6 dB(A)
99,6 dB(A)
8,71 m/s
2 2
1,5 m/s
2 2
7,01 m/s
2 2
1,5 m/s
2 2