Advertisement
TECHNICAL DATA
Rated input
Input voltage
No-load speed
Rate of percussion under load max
Impact energy per stroke according to EPTA-Procedure 05/2009
Drilling capacity in concrete
Drilling capacity in steel
Drilling capacity in wood
Light core cutter in bricks and limestone
Chuck neck diameter
Weight
Noise Information
Measured values determined according to EN 60745.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level (K = 3 dB(A))
Sound power level (K = 3 dB(A))
Wear ear protectors!
Vibration Information
Total vibration values (vector sum in the three axes) determined according to EN 60745.
Vibration emission value ah:
Hammer-drilling in concrete: vibration emission value a
Uncertainty K =
Chiselling: vibration emission value a
Uncertainty K =
WARNING!
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and
may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. The declared vibration emission level
represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained,
the vibration emission may differ. This may signifi cantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but
not actually doing the job. This may signifi cantly reduce the exposure level over the total working period. Identify additional safety measures
to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work
patterns.
WARNING!
Read all safety warnings, instructions, illustrations and
specifications provided with this power tool. Failure to follow
all instructions listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
ROTARY HAMMER SAFETY WARNINGS
Wear ear protectors. Exposure to noise can cause hearing loss.
Use auxiliary handle(s), if supplied with the tool. Loss of control
can cause personal injury.
Hold power tool by insulated gripping surfaces, when performing
an operation where the cutting accessory may contact hidden
wiring or its own cord. Cutting accessory contacting a "live" wire may
ROTARY HAMMER DRILL
h,HD
h,Cheq
make exposed metal parts of the power tool "live" and could give the
operator an electric shock.
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
Use protective equipment. Always wear safety glasses when working
with the machine. The use of protective clothing is recommended,
such as dust mask, protective gloves, sturdy non-slip footwear, helmet
and ear defenders.
The dust produced when using this tool may be harmful to health. Do
not inhale the dust. Wear a suitable dust protection mask.
Do not machine any materials that present a danger to health (e.g.
asbestos).
Switch the device off immediately if the insertion tool stalls. Do not
switch the device on again while the insertion tool is stalled, as doing
so could trigger a sudden recoil with a high reactive force. Determine
why the insertion tool stalled and rectify this, paying heed to the
safety instructions.
19
KH24IXE
800 W
220 - 240 V ~ 50Hz
0-1500 min-1
0-4500 min-1
2.4 J
24 mm
13 mm
30 mm
50 mm
43 mm
3.0 kg
89.5 dB (A)
100.5 dB (A)
13.6 m/s
2
1.5 m/s
2
11. 9 m/s
2
1.5 m/s
2
19
Advertisement
