Technical Data; Jig Saw Safety Warnings - Aeg Step100X Original Instructions Manual

TECHNICAL DATA

Jig Saw
Rated power
Voltage
Stroke rate under no-load
Lengths of stroke
Bevel cuts up to
Cutting depth max. in:
Wood
Steel
Aluminium
Weight according EPTA-Procedure 01/2003
WARNING! Read all safety warnings and all instruc-
tions. Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury. Save all warnings and
instructions for future reference.

JIG SAW SAFETY WARNINGS

Wear ear protectors. Exposure to noise can cause hearing loss.
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring or its own cord. Cutting accessory con-
tacting a "live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
Additional Safety and Working Instructions:
Use protective equipment. Always wear safety glasses when
working with the machine. The use of protective clothing is re-
commended, such as dust mask, protective gloves, sturdy non-slip
footwear, helmet and ear defenders.
STEP100X
700 W
220 - 240 V 50Hz
1000 - 3200 min
-1
20 mm
45 °
100 mm
10 mm
20 mm
2,3 kg
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Wear a suitable dust protection mask.
Chips and splinters must not be removed while the machine is
running.
Always use the protective shields on the machine.
Do not use cracked or distorted saw blades.
Plunge cuts without pre-drilling a hole are possible with soft ma-
terials (wood, light building materials for walls). Harder materials
(metals) must first be drilled with a hole corresponding to the size
of the saw blade.
When working in walls ceiling, or floor, take care to avoid electric
cables and gas or waterpipes.
15