Samsung MIM-E03*N Installation Manual page 8

Installation
1 . Push the two hooks at the bottom of your Wired Remote Controller at the same time, and then pull up the front cover to
separate it from the rear cover .
❋ ❋ Push the two hooks at the same time .
• Insert a flat head screwdriver into the square groove in the upper area of the hook
to disassemble it easily .
NOTE
2 . Arrange the communication cable so that they fit in the housing along the edges of the rear cover .
If you need more space for the wiring
work, you can take it off .
15 cm
10 cm
<When the cable is not concealed> <When the cable is concealed>
7
EHS MONO Kit-EU_IM_05388A-00_EN.indd 7 2015-03-18 오전 11:53:32