Samsung MIM-E03*N Installation Manual page 45

Installation option setting
Entering mode to set option
1 . Remove batteries from the remote controller .
2 . Insert batteries and enter the option setting mode while pressing High Temp button and Low Temp button .
3 . Check if you have entered the option setting status .
Changing a particular option
You can change each digit of set option .
Option SEG1
Explanation PAGE
Remote
Controller
Display
Indication Details
Indication and
Details
0
• When changing a digit of an control kit address setting option, set the SEG3 as 'A' .
• When changing a digit of control kit installation option, set the SEG3 as '2' .
NOTE
Ex) When setting the 'central controller' into disuse status .
Option
Explanation
Indication
❋ ❋ 02 Series installation option
Use central controller (Default)
Disuse central controller
44
EHS MONO Kit-EU_IM_05388A-00_EN.indd 44
SEG2
The option mode you
MODE
want to change
Indication Details Indication
D Option mode
SEG1 SEG2
PAGE MODE
0 D
Classification
SEG3 SEG4
The tens' digit of an
option SEG you will
change
Details Indication Details
Tens' digit
1~6 0~9
of SEG
SEG3 SEG4
The tens' digit
The option
of an option
mode you want
SEG you will
to change
change
2 0
020010 100000 200000 300000
020000 100000 200000 300000
SEG5 SEG6
The unit digit of an
option SEG you will The changed value
change
Indication Details Indication Details
Unit digit The changed
0~9 0~F
of SEG value
SEG5 SEG6
The unit digit
of an option The changed
SEG you will value
change
5 0
SEG1~24
2015-03-18 오전 11:53:56