Wiring Works - Samsung MIM-E03*N Installation Manual

Wiring works

• Field-supplied electrical components such as power switch, circuit breakers, wires, terminal blocks, etc must be
properly chosen with compliance with national legislation or regulation .
CAUTION
• Switch off the power supply before making any connections .
• All field wiring and components must be installed by a licensed electrician .
• Use a dedicated power supply .
• All power connections must be protected from dew condensation by thermal insulation .
• The system shall be earthed . Do not earth the unit to a utility pipe, surge absorber or telephone earth .
Incomplete earth may cause electrical problems .
Layout of PCB
SMPS circuit
⑭ ⑬
No.
①
②
③
④
⑤
⑥
⑦
EHS MONO Kit-EU_IM_05388A-00_EN.indd 9
Micom
①
LED
Load control
⑮
FR Control
CNS2(Green)
Flow Switch
CNS041(Blue)
Water Tank
CNS042(Yellow)
Heater Out(Mono)
CNS047(Black)
Mixing Sensor
CNS045(Blue)
Room Sensor
CNS044(White)
Smart Grid
CNS046(Red)
⑧ ⑨
④ ⑤ ⑥ ⑦
③
②
⑯
2-WIRE COMM
⑫
EEPROM
Note
⑩
⑪
⑰
9
2015-03-18 오전 11:53:34