Samsung MIM-E03*N Installation Manual page 34

f Thermostat 1, 2, and solar heat panel are displayed as below when you set them with an control kit . f
Thermostat 1 (Zone 1), Thermostat 2 (Zone 2), Solar heat panel (ON/OFF)
f Timer button: Whenever you press the button, the sensor value will be displayed in order . f
TW1(In)sensor
f While the sensor value is being displayed but you don't press the 'Timer' button for 5 seconds, the previous status will be f
shown .
f For the sensor fault or absence of sensor installation, corresponding sensor temperature will be displayed as "Er" . f
f When you press the button that does not have a function, f
f When pressing the Delete button one time, all the loads will be Off .
f
f When all the loads are OFF status, "Cancel" Key input will be ignored and f
f When pressing the ESC button, you will exit to the general mode . f
f Mixing valve related operation will work depending on the use of mixing valve (FSV Code : 4041) . f
EHS MONO Kit-EU_IM_05388A-00_EN.indd 33
TW2(Out1) TW3(Out2)
sensor sensor
TW4(Out3)
Tank sensor
sensor
will blink for 3 seconds .
will blink for 3 seconds .
Indoor sensor
33
2015-03-18 오전 11:53:51