Samsung MIM-E03*N Installation Manual page 39

Error codes
Display
474 IPM(IGBT Module) or PFCM temperature sensor Error
475 OUTDOOR UNIT fan2 error
484 PFC Overload Error
485 Input current sensor error
500 IPM is overheated
554 Gas leak error
601 Communication error between the CONTROL KIT and wired remote controller
602 Wired remote controller Master/Slave setting error
604 Communication tracking error between the CONTROL KIT and wired remote controller
607 Communication error between the Master and Salve wired remote controllers
901 Water inlet (PHE) temperature sensor error(open/short)
902 Water outlet (PHE) temperature sensor error(open/short)
903 Water outlet (backup heater) temperature sensor error .
904 DHW tank temperature sensor error
906 Outdoor evaporator inlet temperature sensor (open/short)
Flow switch and water pump error (F/S signal is OFF for 10 sec . during the water pump
911
signal is ON)
Flow switch and water pump error (Water pump signal is OFF for 60sec during the F/S
912
signal is ON)
916 Mixing valve temperature sensor (open/short)
38
EHS MONO Kit-EU_IM_05388A-00_EN.indd 38
Explanation Error Source
OUTDOOR UNIT
OUTDOOR UNIT
OUTDOOR UNIT
OUTDOOR UNIT
OUTDOOR UNIT
OUTDOOR UNIT
Wired Remote
Controller
Wired Remote
Controller
CONTROL KIT,
Wired Remote
Controller
Wired Remote
Controller
OUTDOOR UNIT
OUTDOOR UNIT
CONTROL KIT
CONTROL KIT
OUTDOOR UNIT
CONTROL KIT
CONTROL KIT
CONTROL KIT
2015-03-18 오전 11:53:53