Ripple Patterns Appear In An Image; Spots Or Lines Appear In All Scanned Images; Scanned Image Is Cropped - Epson WorkForce DS-30000 User Manual

Saving Scanned Documents as a Searchable PDF Using Epson Scan 2

Ripple Patterns Appear in an Image

You may see a ripple pattern (called a moiré) in scanned images of printed documents. This is caused
by interference from differing pitches in the scanner's screen and your original's halftone screen. To
reduce this effect, adjust these Epson Scan 2 settings (if available) and try scanning again:
• Select the Descreening setting on the Advanced tab.
• Select a lower Resolution setting.
Parent topic:
Related references
Additional Scanning Settings - Main Settings Tab
Additional Scanning Settings - Advanced Settings Tab

Spots or Lines Appear in All Scanned Images

If spots or lines appear in all your scanned images, clean the rollers and glass scanning surfaces inside
your scanner using a genuine Epson cleaning kit or a soft, moist cloth.
Parent topic:
Related tasks
Cleaning Inside Your Scanner

Scanned Image is Cropped

If the edges of a scanned image are cropped, try the following solutions:
• In Epson Scan 2, select the Main Settings tab. Select Document Size > Settings and adjust the
cropping area shown in the Crop Margins for Size "Auto" setting.
• In Epson Scan 2, select the Advanced Settings tab. Make sure the Edge Fill setting is set to None.
Parent topic:
Related references
Additional Scanning Settings - Main Settings Tab
Additional Scanning Settings - Advanced Settings Tab
Solving Scanned Image Quality Problems
Solving Scanned Image Quality Problems
Solving Scanned Image Quality Problems
151