Deckma Hamburg OMD-2008 Instruction Manual page 20

TEST
Pressing the TEST button
directly leads into the
SYSTEM-TESTS menu.
LO G
The LOG button leads into the
data logger function.
LO G
By pressing the LOG button
twice the recorded data display
mode is invoked.
Issue: 08.07.2015
DECKMA HAMBURG GmbH
Select if you want to activate the
Alarms Test or if Desiccator
status information should be
displayed.
Initially the data logger displays
the live data. With the
button it can be switched to the
graphical display mode.
LO G
The data logger displays
recorded data. With the
button it can be switched to the
non-graphical display mode.
In both data display modes the arrow buttons can be used to
navigate to another date/time of recorded data.
Instruction Manual OMD-2008 (EV, FC, MCU Versions)
Wait until Alarms Test is
completed, as indicated by
countdown value and
progress bar.
Exit from information
Desiccator status display by
pressing the ESC button.
LO G
The data logger displays
recorded data. With the
LO G
button it can be switched to
the graphical display mode.
LO G
Page 19 of 28