Deckma Hamburg OMD-2008 Instruction Manual page 18

AL1
Pressing the AL1 button leads
into SETTINGS menu, Alarm1
settings preselected.
Pressing the Al2 button leads
into SETTINGS menu, Alarm2
settings preselected.
SET
Pressing the SET button from
Normal Operations Display leads
into SETTINGS menu, set
default option preselected.
Issue: 08.07.2015
DECKMA HAMBURG GmbH
AL2
At the SETTINGS menu the
alarms, time delays, the Offset
and optionally the output signal
can be modified within the
limitations. Select the required
point by using the „+" or „-„
button. To modify settings press
the
At the SETTINGS menu the all
settings can be reset to the
factory default values. To reset to
factory values once again press
the
Instruction Manual OMD-2008 (EV, FC, MCU Versions)
button.
SET
button.
SET
To change the value, press
the "+" or "-" button. Confirm
with "OK".
To change the value, press
the "+" or "-" button. Confirm
with "OK".
To change the value, press
the "+" or "-" button. Confirm
with "OK".
To change to "yes", press the
"+" button. Confirm with "OK"
to reset all settings to the
factory default settings.
Page 17 of 28