Supermicro SUPERSERVER 5018D-MTLN4F User Manual page 90

S S
UPER ERVER 5018D-MTLN4F User's Manual
CPU AES
Select Enable to enable Intel CPU Advanced Encryption Standard (AES) Instruc-
tions for CPU to enhance data integrity. The options are Enabled and Disabled.
EIST
EIST (Enhanced Intel SpeedStep Technology) allows the system to automatically
adjust processor voltage and core frequency in an effort to reduce power consump-
tion and heat dissipation. Please refer to Intel's web site for detailed information.
The options are Disabled and Enabled.
Turbo Mode
Select Enabled to allow processor cores to run faster than the frequency recom-
mended by the manufacturer. The options are Disabled and Enabled. If this feature
is set to Enabled, the following items will display:
CPU Power Limit1 (Available when "Turbo Mode" is set to Enabled)
Use this feature to set the power limit for CPU1. Press "+" or "-" on your keyboard
to change this value. Enter 0 to use the manufacture default setting.
CPU Power Limit1 Time (Available when "Turbo Mode" is set to Enabled)
This item allows the user to determine how long CPU1 should operate at the
power limit set by the user for the item above. Press "+" or "-" on your keyboard
to change this value. Enter 0 to use the manufacture default setting.
CPU Power Limit2 (Available when "Turbo Mode" is set to Enabled)
Use this feature to set the power limit for CPU2. Press "+" or "-" on your keyboard
to change this value. Enter 0 to use the manufacture default setting.
DDR Power Limit1 (Available when "Turbo Mode" is set to Enabled)
Use this feature to set the power limit for DDR1. Press "+" or "-" on your keyboard
to change this value. Enter 0 to use the manufacture default setting.
DDR Power Limit1 Time (Available when "Turbo Mode" is set to Enabled)
This item allows the user to determine how long DDR1 should operate at the
power limit set by the item above. Press "+" or "-" on your keyboard to change
this value. Enter 0 to use the manufacture default setting.
DDR Power Limit2 (Available when "Turbo Mode" is set to Enabled)
Use this feature to set the power limit for DDR2. Press "+" or "-" on your keyboard
to change this value. Enter 0 to use the manufacture default setting.
7-8