Renault LAGUNA Driver's Handbook Manual page 191

TRIM – WHEEL
D 2
B
C
A
3
1
Wheel trim
Remove the wheel trim using the
hubcap tool 1, inserting the hook into
the opening provided:
– near the valve for the wheel trim 2;
– around the perimeter for a central
wheel trim.
To refit the wheel trim 2, align it with
the valve 3. Push the retaining hooks in
fully, starting with side A near the valve,
followed by B and C, finishing at D op-
posite the valve.
Do not leave the tools un-
secured inside the vehicle
as they may come loose
under braking. After use,
check that all the tools are correctly
clipped into the tool kit, then posi-
tion it correctly in its housing: risk of
injury.
If wheel bolts are supplied in the
tool kit, only use these bolts for the
emergency spare wheel: refer to the
label affixed to the emergency spare
wheel.
The jack is designed for wheel
changing purposes only. Under no
circumstances should it be used for
carrying out repairs underneath the
vehicle or to gain access to the un-
derside of the vehicle.
5.9