REAR BENCH SEAT
4
Two-door version
Pull the control 4, the seatback B folds
down automatically.
When moving the rear
bench seat, check that
the bench seat ancho-
rage points are clean (they
should be free from grit, cloths or
any other item which may prevent
the bench seat from locking secu-
rely).
3.22
(2/2)
To put the seatback back in position,
raise it then check that it is locked cor-
rectly.
When refitting the seat-
back, make sure it is cor-
rectly locked in place.
If seat covers are fitted,
make sure these do not prevent the
seatback latch from locking in.
Make sure that the seat belts are
positioned correctly.
Reposition the headrests.
B