Toyota ihf1700 Owner's Manual page 16

Bluetooth hands-free system
Hide thumbs Also See for ihf1700:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 4
Adding contact list entries
You can store a list of names and phone numbers in the hands-free system's contact list. 
The contact list can support up to 50 entries. The contact list is only available when a handset 
device is connected to the hands-free system.
You can enter up to 50 digits for each contact list entry. You can also use +, *, or # characters when 
dialling a number. "WAIT" and "PAUSE" commands are also accepted.
 Note: For safety reasons, it is recommended that contact list entries be added while the 
vehicle is stationary.
Adding a contact list entry
1  Press and release the MULTI-FUNCTION button.  
The hands-free system responds: Phone menu. {Say a command}.
2  When prompted, say "CONTACT LIST".
  If the hands-free system responds: Contact list is empty. Do you wish to add a contact? Say 
"YES". 
or 
If the hands-free system responds: Contact list. {Say a command}. Say "ADD CONTACT".
4  When the hands-free system responds: Say the name. Recite the name of the contact to be 
stored. 
If an error is detected, the hands-free system asks you to try again. 
If it accepts the name, the hands-free system responds: Say the number for <name>.
5  Dictate the number as an entire number (without pauses between digits). 
or  
Dictate the number as a series of segments (for example, say the 1st  digits, then the next  
etc.), until you have dictated the entire number.   
The hands-free system repeats the number it heard.
6  When you have correctly entered the entire phone number, say "STORE" (or "YES") to store 
the contact. 
The hands-free system responds: Contact added. Would you like to add another contact?
7  Say "NO" to exit contact list.  
or 
Say "YES" to add another entry.
 Note: Speak numbers as continuous digits. For example, dictate 555-2211 as "5-5-5-2-2-1-1", 
not "5-5-5-twenty-two-eleven." 
 Note: To delete a phone number segment, say "CLEAR" when prompted for the next 
segment. The hands-free system responds Last String Cleared, and echoes any remaining 
segments, and waits for you to dictate a new segment.
 Note: To delete all phone number segments dictated so far, say "CLEAR ALL" when prompted 
for the next segment. The hands-free system clears all segments and returns to the Number 
Please? prompt.
Bluetooth
    15
®

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents