Controls & Components - Grizzly G0762 Owner's Manual

Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to Figures 1–5 and the following descrip-
tions to become familiar with the basic controls of
this machine.
A
H
G
F
E
Figure 1. Control panel and spindle speed
controls.
A. RPM Digital Readout: Displays spindle
speed.
B. Variable-Speed Dial: Controls spindle speed
within the selected range.
C. High/Low Range Lever: Selects either high
or low spindle speed range.
D. SPINDLE REVERSE Button: Starts coun-
terclockwise spindle rotation (as viewed from
above). The spindle must be completely
stopped before this button is pushed.
-4-
manual BEFORE
B
C
D
E. EMERGENCY STOP Button: Cuts power
to the spindle motor and remains depressed
until reset. Twist clockwise until it pops out to
reset.
F. STOP Button: Stops spindle rotation.
G. POWER Button: When pushed, enables
power to the control panel and illuminates.
H. SPINDLE FORWARD Button: Starts clock-
wise spindle rotation (as viewed from above).
The spindle must be completely stopped
before this button is pushed.
I. Master Power Switch: Enables power to the
machine.
I
Figure 2. Location of master power switch and
Z-axis crank.
J. Z-Axis Crank: Moves headstock up and
down.
Model G0762 (Mfd. Since 5/14)
J