Results - Agilent Technologies E4404B Operation Manual

Making GSM Air Interface Measurements
Making The Transmitter Receive (Rx) Band Spurious Measurement
Factory default parameter settings provide a GSM compliant
measurement. For special requirements, you may need to change
default settings:
• Mode setup and frequency/channel parameters.
• Measurement setup parameters.
Parameters that exist under the
NOTE
to be changed. Any changes from the default values may result in
invalid measurement data.

Results

An example screen from a Transmitter Rx-Band Spurious
measurement is shown below in Figure 4-5.
Figure 4-5 Transmitter Rx Band Spurious Measurement Results
4-12
Use the and
Mode Setup
parameters for all measurements made within the current mode. For
further information refer to Chapter 1 of this document.
These are measurement specific parameters changed using the
measurement setup (
to default settings at any time by pressing
. For further information on measurement setup
Meas Defaults
parameters, refer to the ESA-E Series Spectrum Analyzers GSM
Measurement Personality User's Guide.
Frequency Channel
) menu. Parameters can be returned
Meas Setup
Meas Setup Advanced
keys to change these
, and
Meas Setup Restore
key seldom need
Chapter 4